manualshive.com logo in svg

Contec FX-DS110-APE, Руководство пользователя, Страница: 130 / 132

Поделиться
Скачать
Contec FX-DS110-APE Скачать руководство пользователя страница 130

Appendix

FX-DS110-APE

119

AP (Access Point)

In the FLEXLAN-DS110 series, access points serve as the bridge
between wired networks and wireless networks, as well as
providing bridge functions between segments and IP tunnel
functions indispensable to the building of versatile, large-scale
networks.

User Unit

In the FLEXLAN-DS110 series, this refers to the FX-DS110-PCC
or a device with the FX-DS110-PCC built in.

RIP(Routing Information Protocol)

RIP is a protocol used by routers to exchange routing information
automatically.  This unit supports the RIP1 version.

ESS ID (Extended Service Set ID)

In the FLEXLAN DS110 series, the ESS ID is like a name assigned
to the wireless LAN network to which a unit belongs.  The same
name must not be given to more than one wireless terminal.
Conversely, a wireless network can be partitioned by using different
ESS ID names.

Channel

This term has the same meaning as a television or radio channel.
In the 2.400 to 2.4835GHz ISM band used by this product, the
IEEE 802.11 standard provides for division into 11 (FCC model) or
13 (CE model) channels numbered 1 to 11 or 13.  Even on the
same network, wireless devices operating on different channels
cannot communicate with each other.

Содержание FX-DS110-APE





































































































































Отзывы:

Нет отзывов