Contec FX-DS110-APE, Руководство пользователя, Страница: 19 / 132

Component Locations and Setting
FX-DS110-APE
8
Antenna
Transmits and receives radio waves.
LED indicator
The AP has 10 LED indicators (7 on the front, 3 on the rear) to
show information such as the user unit connection status,
transmit/receive, power supply, and wired LAN connection status.
When the AP is operating normally, the LEDs illuminate as follows
depending on the operation mode and unit type of the AP.
Table 2.1. LED Display during Normal Operation
Status
10/100M On Indicates a 100BASE-TX connection.
Off Indicates a 10BASE-T connection.
LINK/ACT On Indicates that the connection is operating normally.
Flashing Indicates data transmit or receive is in progress.
Off Indicates that the AP is not connected.
FDX/COL On Indicates that the AP is operating in full-duplex mode.
Off Indicates that the AP is operating in half-duplex mode.
BUSY Flashing Indicates that the AP is accessing the Smart Media.
Off Indicates that the AP is not accessing the SmartMedia.
If the FDX/COL LED illuminates, this indicates that the settings need to be changed.
Indicator Name
The operation of the POWER, MGMT, WLINK, and WTX/WRX
LEDs depends on the AP operation mode and unit type, as follows.
Table 2.2. Unit Type AP in Standard Mode, Inter-Segment
Brouter Mode, Brouter Mode, or Interconnection
Mode
Status
POWER(Front back) On Power On
MGMT On Firmware is running.
WLINK(Front back) On User unit is connected.
WTX/WRX Flashing Transmitting or receiving wireless data.
Indicator Name