TDMA CONTROL 602-702 Eng Nov.doc
60
Input Unit (with inputs, Ethernet socket and SD slot).
Output Unit (with power supply and outputs)
7.1.1
Superimposed Assembly
Note: For mounting the controller, the output unit is always
secured under the input unit.
After removing the screw (1) the front cover can be tilted up from the front (2)
and removed (see picture opposite). When you reinsert the upper part make
sure the hinges slide into the slots provided, before lowering the front section
and refixing the screw.
The lower housing section is fixed to the wall by three screws. First drill and
screw two screws into the wall at 140 mm centres. Mount housing onto these
screws and then drill and insert the third screw through the lower hole and fix
to the wall.
Third screw location hole
Thereafter, the electrical connections can be made (see Section 7.2).
2
1
140m
m