TDMA CONTROL 602-702 Eng Nov.doc
53
5.16.4
Party Switch
If heat is required during the night setback period, then pressing the Party Switch will
bring the heating back on. To do this press when in the main menu screen and
continue to press the
until Party Switch appears on the screen, then press + followed
by which will change the Off to On. To revert back to normal operation, press the
which shows the following message ‘ Function Really Deactivate?’, to confirm press
. If you do not deactivate the Party Switch, the controller will naturally do this the
next time the night setback is required.
Notes for CONTROL 702
In setting ‘Individual setting of heating circuits: Inputing ‘Yes’ – The function is effective
only on the heating circuit, which the TR-CONTROL II Touch has been assigned.
Inputing ‘No’ – The function affects all heating.
5.16.5
Room Temperature Drop ….min to …
o
C
With this function, the ambient temperature of the room can be lowered. When
activated (press then
until ‘Room Temp Drop’ is shown, then press to activate)
the room temperature is lowered for the duration set and to the preset temperature.
The setting values can be found in Set HC.
To deactivate this function press
, a message will appear asking ‘Disable Function
Really?’ to confirm press and the function will be deactivated. (see Section 5.7.1)
5.16.6
Temperature Rise …Min at …°C
With this function, the ambient temperature of the room can be raised. When activated
(press then
until ‘Room Temp Rise’ is shown, then press to activate) the room
temperature is raised for the duration set and to the preset temperature. The setting
values can be found in Set HC.
To deactivate this function press
, a message will appear asking ‘Disable Function
Really?’ to confirm press and the function will be deactivated. (see Section 5.7.1)
