Hardware Options Installation
3-21
Compaq Confidential – Need to Know Required
Writer:
Jennifer Hayward
Project:
Compaq ProLiant ML330 Generation 2 Server Setup and Installation Guide
Comments:
Part Number:
234833-001
File Name:
d-ch3 Hardware Options Installation.doc
Last Saved On:
5/23/01 3:48 PM
5.
Connect any cables to the expansion board.
6.
Reinstall the expansion board retainer by reversing step 3.
To remove an expansion board, reverse steps 1 through 5.
Memory Modules
Technical Information and Important Guidelines
CAUTION:
To prevent damage to equipment or loss of information, make sure
that the server is powered down, all cables are disconnected from the back of
the server, and the power cord is disconnected from the grounded (earthed)
AC outlet before removing the access panel.
CAUTION:
Electrostatic discharge (ESD) can damage electronic components.
Make sure that you are properly grounded (earthed) before beginning any
installation procedure. See Appendix B, “Electrostatic Discharge,” for more
information.
CAUTION:
When handling a DIMM, be careful not to touch any of the contacts.
Doing so may damage the component.
When installing DIMMs, you must follow these guidelines:
■
Memory modules must be industry standard, 168-pin, PC133-MHz ECC
Registered SDRAM DIMMs and support CAS Latency 3 (CL=3).
■
Do not mix ECC and non-ECC SDRAM DIMMs. If different types of
DIMMs are mixed, the system will not properly function.
