Collomix XM 2-650, Руководство по эксплуатации

Страница: 10 / 23

Collomix GmbH Forced-action mixer
85080 Gaimersheim / Germany Collomatic XM
Ref.no.: 39017 Rev. US02-2013 Page 10
•
Always pull out the mains plug when not using the machine, before changing the
mixing tool or before star琀椀ng any maintenance work.
• Never use the cable to pull the plug out of the socket outlet. Protect the cable from
heat, oil and sharp edges.
• For outdoor use, use only cables which have been approved for the purpose and bear
corresponding markings.
• Never connect the machine to household socket outlets. It may only be connected to
special power outlets, e.g. distribu琀椀on boards for construc琀椀on sites with earth-leakage
circuit-breakers.
• If a cable reel is used, the cable must be fully unwound. There is a risk of the cable
catching 昀椀re from overhea琀椀ng. It can also cause a loss of power which will in turn
trigger the undervoltage fuse.
• Before you switch on the machine, check that the tool wrench and any other objects
have all been removed from the mixing tub.
• Never mix any materials with a 昀氀ash point of below 70°F (21°C). Never use any solvents
with a 昀氀ash point of below 70°F (21°C) to clean the machine. Risk of explosion! Never
use the machine in any areas where there is a poten琀椀ally explosive atmosphere. Risk of
explosion!
• Always make sure the machine is at a stands琀椀ll before you ever take any material
samples.
•
Do not operate the machine without the guard cage or without any of the parts of the
housing. Risk of crushing!
•
The consequence of deliberately shu琀�ng o昀昀 any of the safety func琀椀ons is an acute
risk of accidents and injury.
• Never use the trolley for any other purpose than for transpor琀椀ng the original Collomix
mixing tub for which it is designed.
• Only open and close the machine with the handle provided. There is a risk of crushing
if you a琀琀empt to open and close it at any other point.
• Always replace the gas-pressurized spring with a new one if it is defec琀椀ve. Never open
the gas-pressurized spring as it is pressurized. Risk of injury!
• Make sure that the control pin moves without hindrance at all 琀椀mes and that the limit
switch also works properly at all 琀椀mes. It is impera琀椀ve that these never become soiled.
A malfunc琀椀on here may cause the mixing tools to start up uninten琀椀onally. Risk of
crushing!
• If the machine is li昀琀ed by a crane or similar, the li昀琀ing ropes/cables or belts must only
be fastened to the described points provided on the machine. Never stand under the
suspended load.
• Use only original replacement parts.
3.1 Responsibility of the user
These Opera琀椀ng Instruc琀椀ons must be kept in close proximity to the machine and must be
available to all persons working with or on the machine at all 琀椀mes.
Never use the machine if it is not in good working order or is not safe to use. Check that the
machine is in proper working order every 琀椀me before you start using it.