Collomix XM 2-650, Руководство по эксплуатации

Страница: 20 / 23

Collomix GmbH Forced-action mixer
85080 Gaimersheim / Germany Collomatic XM
Ref.no.: 39017 Rev. US02-2013 Page 20
14. Care and maintenance
•
Follow these notes and instruc琀椀ons to ensure that your forced-ac琀椀on mixer machine has
a long life and o昀昀ers trouble-free service.
•
Grease or oil all moving parts every 100 opera琀椀ng hours . Check that all moving parts run
smoothly.
•
Clean the machine, mixing tools and the tub thoroughly every 琀椀me you 昀椀nish using them.
A quick and easy method of cleaning the mixing tools is to 琀椀p in a bucket of clean sand or
similar and then switch on the machine for approx. 30 seconds.
•
Never use a
water hose or high-pressure cleaner
to clean the machine itself. This could
cause the ball-bearings, etc., to run dry.
•
Check the state of the mixing tools for wearing out.
•
Replace all damaged or bent mixing tools.
•
Make sure that the control pin moves without hindrance at all 琀椀mes and that the limit
switch also works properly at all 琀椀mes. It is impera琀椀ve that these never become soiled.
Never start the machine if there are any faults or any obvious damage. All faults should
only ever be repaired by a quali昀椀ed expert.
•
Use only original replacement parts.
•
Repairs should only be carried out by quali昀椀ed experts. The manufacturer also o昀昀ers a
repair service at its factory.
CAUTION
ALWAYS disconnect the mixer form the power supply before cleaning, changing the
mixing tool, or performing any maintenance
DANGER
•
NEVER use any solvents or 昀氀ammable substances to clean the machine
.