Collomix XM 2-650, Руководство по эксплуатации

Страница: 14 / 23

Collomix GmbH Forced-action mixer
85080 Gaimersheim / Germany Collomatic XM
Ref.no.: 39017 Rev. US02-2013 Page 14
8. Mixing tools
This tooling op琀椀on should be selected for the prepara琀椀on of thin-
bodied material or very light material which has a tendency to
form lumps. The XM 160 rotates at a speed of 185 rpm and the
Dissolver at 670 rpm, e.g.
• Self-leveling materials
• Flooring mixes
• Pouring mortars
• Mul琀椀-component materials
• Liquid plas琀椀cs
• Grou琀椀ng compounds
• Bonding agents
Three threaded spindles are available for the mixing tools. The two spindles for the universal
mixing tools rotate at a speed of 185 rpm and have a size M 18 thread.
The third threaded spindle rotates at a speed of 670 rpm and is for the Dissolver. To ensure
that this spindle is not 昀椀琀琀ed with the wrong tool it has a size M 16 thread.
Your forced-ac琀椀on mixer comes with three di昀昀erent mixing tools (Standard: universal mixing
tools and a star-type mixing tool). These will enable you to mix materials of all viscosi琀椀es.
8.1 Tooling options
Both mixing tools rotate at a speed of 185 rpm. Use this tooling
op琀椀on for mixing all high-viscosity, viscous and heavy materials
such as, for example.
• Ready-mixed mortar
• Quartz-昀椀lled epoxy-resins
• Industrial 昀氀ooring
• Fireproof and acidproof materials
• Fillers
• Epoxy mortar
• Ceramic compounds
• Concrete
• 2-component and mul琀椀-component materials
Universal mixing tool
XM 160 (70153) Universal mixing tool
XM 195 (70155)
Universal mixing tool
XM 160 (70153)
Dissolver ST 160 (70157)
Adjus琀椀ng the height of the
mixing tools.
8.2 Adjusting the height of the mixing tools
In order to prevent deposits of residual material collec琀椀ng at the bo琀琀om of the tub the
mixing tools are height-adjustable.To adjust them, slacken the hexagon nut on drive spindle
and move the mixing tool up or down as required by turning to the le昀琀 or right.
The mixing tools should be approx. 1 - 2 mm above the bo琀琀om of the tub. If they are set too
low they will scrape against the bo琀琀om of the tub and damage it beyond repair.
CAUTION
ALWAYS
disconnect the mixer form the power supply before cleaning, changing the
mixing tool, or performing any maintenance