Collomix XM 2-650, Руководство по эксплуатации

Страница: 5 / 23

Collomix GmbH Forced-action mixer
85080 Gaimersheim / Germany Collomatic XM
Ref.no.: 39017 Rev. US02-2013 Page 5
1. Mixing tools - Counter-rotates at op琀椀mum rpm to mix material. Paddles are changeable to
accomodate thin and thick materials.
2. Rim scraper - Con琀椀nuously moves around the rim of the tub and forces the materials back into
the middle of the tub.
3. Guard hood - Protects the gear unit and the mixing tools from direct access. Hood has opening on
top, with mesh guard, to allow operator to see the inside of the tub.
4. Latch bar - Releases the swivel arm when pulled out, to open and closed the mixer
5. Handle - to open the swivel arm when pulled up and closes the mixer when pulled down
6
.
Main switch / EMERGENCY ON/OFF switch - Switches the power on and o昀昀. The switch
automa琀椀cally jumps to the o昀昀 positon in the event of undervoltage which prevents the machine
from being started up again uninten琀椀onally.
7. Timer switch
- Used to select mixing 琀椀me of 90 sec., 180 sec. or con琀椀nuous mixing mode.
8. Jack rings (2x) - Used to a琀琀ach belts for li昀琀ing and moving the mixer using a forkli昀琀 or crane.
9. Carrier handles, lockable - Used to hold the mixer and movie the machine on 昀氀at surfaces
10. Cable plug - to connect machine by using an accordingly extension cord with a 110 volts power
supply.
11. Control pin for the mixing tub
- Enables the mixer when a suitable tub is placed on the mixer. The
control pin ensures that the mixer will not start withour a tub in place.
12. Tub Dolly (accessory) - Recommended for li昀琀ing the tub out of the machine and to transpor琀椀ng it.
13. Axle bar with tub stop - Helps to 昀椀x the tub for emp琀椀ng by turning the bar through 90°.
14. Tub holder
- Also needed to lock the tub into positon for emp琀椀ng with the dollly.
15. Arms
- to be able to pick up the tub with the dolly,
16. Tub mount - 昀氀oa琀椀ng mounted devices to place into the tub handles, for li昀琀ing the tub with the
dolly
Key to illustration