VENUE D-Show Hard Drive
1
VENUE D-Show Hard Drive
For VENUE FOH Rack
Replacing a Hard Drive
The following procedure outlines the steps for removing and
replacing the hard drive in the VENUE FOH Rack.
To remove the FOH Rack Hard Drive:
1
Power down the FOH Rack and disconnect all power, audio
and cables from the unit.
2
Using a #1 Phillips screwdriver, remove the 4 type P (M3 x 6
flat head) screws that secure the hard drive bay to the FOH
Rack.
3
Slide out the hard drive bay from the FOH Rack.
4
The IDE cable and the 4-pin power cable are hot-glued in
place. Use a small flat blade screwdriver or X-acto knife to
carefully remove the bead of glue holding each connector in
place.
5
Disconnect the IDE cable and power cable, while taking
note of the cable plug orientation for each cable.
VENUE FOH Rack hard drive
If you are using a power screwdriver be sure to use the low-
est torque setting to prevent damage to screws or inserts.
Removing the hard drive bay from the FOH Rack
Sliding the hard drive bay from the FOH Rack
Disconnecting cables from the hard drive
