COBHAM Sea Tel 9711-56 IMA C Band, Руководство по установке

Страница: 65 / 234

Sea Tel 9711-56 IMA Installation in 168” Radome
5-11
EAR Controlled - ECCN EAR99
NOTE: It is extremely important to
assure that the flanges are properly
aligned before the bolts are tightened
and kept in alignment as the hardware is
aligned. This is necessary for the inside
clearance and the outside aesthetic
appearance of the radome. Please note
this picture shown good alignment as
observed from inside the radome and
below a picture of poor flange
alignment.
Good flange alignment
Bad flange alignment
38. Open each seam wide enough
to install a good bead of silicone
caulk, apply Loctite to and
firmly tighten all of the bolts in
that seam (Smaller beads of
caulking can be applied from
outside and inside if you prefer).
39. Clean excess caulking off of the
flange area (inside and out) like
was done in step 11 above.