COBHAM Sea Tel 9711-56 IMA C Band, Руководство по установке

Страница: 35 / 234

Sea Tel 9711-56 IMA Installation in 144” Radome
4-11
EAR Controlled - ECCN EAR99
33. Route the C-Band feed
harness along the rigid
waveguide, around the
back/top of the reflector to
the right side where the ICU
and QOR Switch Box are
located.
34. Connect the C-Band feed
harness to QOR switch box
J4 connector and tighten
the retainer screws.
35. Connect the C-Band LNB
coax to S1A on the top of
the QOR switch box.
36. Remove the 4 nylock nuts
from the bolts that pass up
through the wood and lower
isolation plate.
37. Discard this hardware.
38. Remove the 4 bolts in the U-
bracket that restrains the
Right side (shown) of the
cross-level beam.
39. Remove the 4 bolts in the U-
bracket that restrains the
Left side (hidden in
foreground) of the cross-
level beam.
40. Remove the foam padding
from both sides of the cross-
level beam.
41. Discard this hardware.