COBHAM SAILOR 600 VSAT Ka, Руководство по установке

Страница: 93 / 178

Keypad and menus of the ACU
98-148248-A Chapter 6: Configuration 6-37
Confi
guration
BUC calibration
Test
Not ready
(waiting for input from GNSS, e.g. GPS)
Not ready: Initializing
Not ready: Need pos
Blocking zone
(antenna is pointing into a blocking zone)
No TX zone
(antenna is pointing in a no TX zone; TX is off)
2. Current menu, see The menu tree on page 6-38.
3.
NAV
: Navigational information
First letter:
G
(Valid GPS signal received from the GPS module) or
g
(No valid GPS fix)
Second letter:
H
(Valid ship heading data received from the ship’s gyro) or
h
(No valid
heading data).
4.
MDM
: Current status of the modem:
TEST, ERROR, READY, INIT, RXOK, ACQ,
NETOK, RESET, OFF
5.
LAN
: LAN connectors used,
1
,
2
,
3
,
4
,
–
.
6.
SAT
: Longitude, satellite position of the currently active satellite profile.
7.
RX:
1
(Rx1 Lock,
-
or
1
),
-
(Rx2 Lock,
-
or
2
),
L
(RX polarisation of currently active satellite profile:
H
(horizontal),
V
(vertical),
L
(left-
hand)
R
(right-hand).
8. RF tracking frequency in GHz and LNB LO Frequency.
9.
TX
: <Extern mute> <Modem TX> <ADU TX> <TX pol>
Read the TX status as follows: Upper case: Ok, lower case: Not ok.
<Extern mute> = [X,x]
<Modem TX> = [m,M]
<ADU TX> = [a,A]
<Tx pol>=[-,H,V,L,R]
After 1 hour the display is dimmed to lowest intensity. Press any key to light up the display.
6.6.2 Navigating the menus
Use the keypad to navigate the menus.
• Press
OK
or to select a menu item.
• Use the arrow keys and to go through the menu items or enter
a number, digit by digit.
• Use the arrow keys and to go through the settings and move
from one digit to the next.
• Press
OK
to select a setting.
• Press again to move one level up. If applicable, confirm to store the new setting by
pressing
OK
.
SAILOR600Ka-IM-98-148248.book Page 37 Monday, November 23, 2015 1:36 PM