COBHAM SAILOR 600 VSAT Ka, Руководство по установке

Страница: 149 / 178

List of ACU events
98-148248-A Appendix C: System messages C-9
Sy
st
em mess
ag
es
0806E-0 ADM ERROR VMU reference signal The VMU Rx or Tx reference signal is not
present. Whether this error Rx or Tx reference,
depends on the users selection on the modem
profile page. Make sure VMU Rx/Tx cable is
connected and that the VMU is configured to
output the RX/TX reference signal.
0806F-0 ADM WARNING ROSS synchronization The ACU has become out of sync with the ROSS
device, most likely because the ACU has been
replaced, or the ROSS satellite profile is new. A
manual (forced) handoff sequence must be
initiated from the ROSS, refer to the ROSS
manual for the procedure.
08075-0 ADM WARNING Rx cable calibration The Calibration of the ACU-Antenna cable failed.
Cable could be defective, too long, of too poor
quality, not properly connected, or the TIM or
AMB hardware could be defective.
08078-0 ADM WARNING VMU TX frequency
invalid
VSAT modem unit provided a TX frequency of
zero. This may degrade tx performance. To
remove this warning re-configure the modem to
provide the correct tx frequency.
08079-0 ADM WARNING ACU Fan Internal Fan is malfunctioning.
0807A-0 ADM WARNING Automatic azimuth
calibration pending
Automatic azimuth calibration mode is enabled,
which means that the system will try to perform
an azimuth calibration using the target satellite
whenever satellite data is received from the
VMU. When the calibration succeeds the feature
will be automatically disabled and system will
return to normal operationl. WARNING: If a
system has not completed azimuth calibration
after installation, the blocking zones may appear
at the wrong angles.
0807B-0 ADM WARNING BUC calibration
outdated
BUC calibration is outdated. It must be rerun
from the Core Module using eg. One Touch
Commisioning.
08100-0 ADM ERROR PSM low voltage (22 V) The ADM measures a different antenna voltage
than expected. If the problem is not solved by a
restart, and the PSM is not reporting any errors,
the ADM is probably defective.
Error code (ID) Unit Severity Description Explanation
Table C-2: ACU event messages (Continued)
SAILOR600Ka-IM-98-148248.book Page 9 Monday, November 23, 2015 1:36 PM