COBHAM SAILOR 600 VSAT Ka, Руководство по установке

Страница: 60 / 178

Heading input and position system
6-4 Chapter 6: Configuration 98-148248-A
3. Click
Apply
.
4. In the section
Position
,
Mode
select
GNSS System
or
Manual
. The
Manual
mode is
used for fixed installations (fixed heading).
5. For
GNSS System
, select from
GPS
,
Beidou
,
GPS and Beidou, GPS and GLONASS
.
The SAILOR 600 VSAT Ka uses GPS by default
6. For
Manual
enter the latitude, longitude and altitude.
7. Click
Apply
.
Heading input Description
External Heading input from the vessel’s gyro compass (default).
If there is no heading input due to failure, alarms are raised and the
antenna continues in gyro-free mode. When heading input is available
again and a new acquisition is made, alarms are cleared. See also
Operation in gyro-free mode on page 6-13.
Fixed Use this setting for making an azimuth and cable calibration if there is no
input from the vessel’s gyro compass and for permanent installations like
remote areas or oil rigs, or during training and test.
Important: Fixed heading is not allowed for sailing vessels!
Enter the vessel heading in degrees.
None I
mportant: You must make an azimuth and cable calibration with
Fixed before you can use this setting. This is required in order to
be able to use blocking zones. After a successful azimuth and
cable calibration you must change the heading input setting
from Fixed to None.
Select this setting after a successful azimuth calibration with Fixed
heading if the system does not have input from the vessel’s gyro compass.
See also
Operation in gyro-free mode on page 6-13.
Table 6-1: Heading input options
Note
If you change the heading settings from external to fixed or vice versa you must
make a new azimuth calibration.
Note
If you move outside coverage of the selected system, you will eventually lose
connection to the satellite network. The
Position
field in the
Dashboard
of the
web interface will show
Acquiring
.
SAILOR600Ka-IM-98-148248.book Page 4 Monday, November 23, 2015 1:36 PM