manualshive.com logo in svg

COBHAM SAILOR 600 VSAT Ka, Руководство по установке

Поделиться
Скачать
COBHAM SAILOR 600 VSAT Ka Скачать руководство пользователя страница 39

Installation of the ADU

98-148248-A

Chapter 3:  Installation

3-15

Installation

3.3

Installation of the ADU

3.3.1

Overview

The following sections describe the installation and grounding of the antenna. The ADU is 
shipped fully assembled. You have to install it on the mast and attach the ADU cable.

The antenna comes with a lifting harness already fitted. The lifting harness is provided 
solely for the purpose of installation the antenna. The belt of fibre material prevents the 
antenna from toppling during the lifting process.

WARNING!

Use the already mounted lifting harness to lift the ADU 

without damaging the radome. 

WARNING!

The ADU may be subject to swaying motions in windy 

conditions. Always use tag lines to stabilise the ADU during hoisting.

Figure 3-14: Use of the lifting harness and tag lines for safe hoisting

WARNING!

Use the lifting harness only to lift the antenna. Do not lift other 

objects or persons with the harness.

Lifting harness with 4 
lifting straps

Tag lines

SAILOR600Ka-IM-98-148248.book  Page 15  Monday, November 23, 2015  1:36 PM

Содержание SAILOR 600 VSAT Ka



















































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды