Club Car Carryall 1500 2016, Руководство по техническому обслуживанию и ремонту

Страница: 81 / 436

HYDRAULIC BRAKE AND PARK BRAKE
SYSTEMS Park Brake System
6
10. At pedal, install cable in bracket and secure with jam nuts (Figure 5-5, Page 5-4) . Tighten jam nuts to 18
lb-ft (25 N·m).
11. Place cable end over pin on pedal and secure with bow-tie clip.
12. At transmission, install cable (11) in bracket (13) and finger-tighten jam nuts. Attach cable end to park brake
caliper (7) with clevis pin (10) and bow-tie clip (9).
13. Adjust park brake. See Park Brake Adjustment on page 6-23.
14. Lower cargo bed.
15. Install seat bottom.
PARK BRAKE ADJUSTMENT
1. Chock the rear wheels and release the park brake.
2. Remove the seat bottom.
3. Unload and raise the cargo bed.
4. Loosen jam nuts securing park brake cable (11) to bracket (13) on transmission (Figure 6-8, Page 6-21) .
5. Set pedal to first ratchet tooth. Adjust upper jam nut until caliper (7) engages park brake disc (3).
6. Release park brake at pedal and verify caliper pads do not drag on rotor.
7. Once proper adjustment is achieved, tighten jam nuts.
8. Lower cargo bed.
9. Install seat bottom.
10. Verify park brake functions properly before returning vehicle to service.
2016 Carryall 1500/1700 and XRT 1550 Maintenance and Service Manual Page 6-23