Club Car Carryall 1500 2016, Руководство по техническому обслуживанию и ремонту

Страница: 241 / 436

ELECTRICAL COMPONENTS: GASOLINE
VEHICLES Reverse Warning Buzzer Limit Switch (If Equipped)
13
REVERSE WARNING BUZZER INSTALLATION
1. Install the reverse warning buzzer and secure it with two plastic rivets.
2. Connect the black wire from the wire harness to the negative (–) terminal on the buzzer.
3. Connect the red/white wire from the wire harness to the positive (+) terminal on the buzzer.
4. Lower and secure the hood.
5. Connect battery and spark plug wire(s). See Side-Post Battery: Connecting the Battery – Gasoline/Diesel
Vehicles on page 1-4.
See Top-Post Battery: Connecting the Battery- Gasoline/Diesel Vehicles on page 1-4.
REVERSE WARNING BUZZER LIMIT SWITCH (IF EQUIPPED)
See General Warnings, Section 1, Page 1-2.
TESTING THE REVERSE WARNING BUZZER LIMIT SWITCH
See Test Procedure 25 – Reverse Warning Buzzer Limit Switch (If Equipped) on page 11-31.
REVERSE WARNING BUZZER LIMIT SWITCH REMOVAL
1. Disconnect battery and spark plug wire(s). See Side-Post Battery: Disconnecting the Battery –
Gasoline/Diesel Vehicles on page 1-3.
See Top-Post Battery: Disconnecting the Battery- Gasoline/Diesel Vehicles on page 1-4.
2. Raise the hood.
3. Disconnect the wires from the reverse warning buzzer limit switch (Figure 13-7, Page 13-12) .
4. Remove the screws, nuts, washers, and lockwashers that secure the limit switch.
5. Remove the limit switch.
2141
Figure 13-8 Reverse Warning Buzzer Limit Switch
Adjustment Slot
2142
Figure 13-9 Reverse Warning Buzzer Limit Switch
(Properly Adjusted)
2016 Carryall 1500/1700 and XRT 1550 Maintenance and Service Manual Page 13-13