Club Car Carryall 1500 2016, Руководство по техническому обслуживанию и ремонту

Страница: 411 / 436

HYDRAULIC ATTACHMENT SYSTEM Cylinders
19
2287
Figure 19-71 Lubricate Head Seals
2288
Figure 19-72 Tighten Head Against Case
CYLINDER BUSHINGS (IF EQUIPPED)
Removal and Installation
WARNING
• Wear safety glasses to prevent eye injury when any of the following conditions exist:
– Fluids are under pressure.
– Flying debris or loose material is present.
– Engine is running.
– Tools are being used.
1. Remove bushing(s) (1) (Figure 19-73, Page 19-37) from the base end of the hydraulic cylinder, one bushing
on each side of cylinder.
2. Apply LOCTITE 271 (Red) to the bushings (2) before installing them into the cylinder (Figure 19-74, Page 19-37) .
1
2
2289
Figure 19-73 Remove Bushings From Base
2290
Figure 19-74 Apply LOCTITE and Install Bushings Into
Base
2016 Carryall 1500/1700 and XRT 1550 Maintenance and Service Manual Page 19-37