Club Car Carryall 1500 2016, Руководство по техническому обслуживанию и ремонту

Страница: 406 / 436

19
Cylinders HYDRAULIC ATTACHMENT SYSTEM
CYLINDER ASSEMBLY
WARNING
• Wear safety glasses to prevent eye injury when any of the following conditions exist:
– Fluids are under pressure.
– Flying debris or loose material is present.
– Engine is running.
– Tools are being used.
1. Install the O-ring on the piston (Figure 19-53, Page 19-32) .
NOTE: Do not overstretch the seal.
2. Install the seal on the tool and stretch it until it fits the piston (Figure 19-54, Page 19-32) . Allow the O-ring to
stretch for 30 seconds before removing it from the tool.
3. Install the seal on the piston (Figure 19-55, Page 19-33) .
4. Use the ring compressor to compress the seal to the correct size (Figure 19-56, Page 19-33) .
NOTE: Leave the piston in the ring compressor for three minutes.
2269
Figure 19-53 Install Piston O-ring
2270
Figure 19-54 Stretch Piston Seal
Page 19-32 2016 Carryall 1500/1700 and XRT 1550 Maintenance and Service Manual