Club Car Carryall 1500 2016, Руководство по техническому обслуживанию и ремонту

Страница: 350 / 436

17
Half Shafts DRIVETRAIN COMPONENTS
1895
Figure 17-1 Axle Spindle Nut And Washer
2193
Figure 17-2 Camber Adjustment Bar
13. Separate the half shaft hub from the differential and remove the half shaft (Figure 17-3, Page 17-2) . See
following NOTE.
NOTE: Use a 5/16-inch wide flat blade screwdriver to separate the half shaft hub and differential.
The hub end of the half shaft has a round compression ring and groove. The compression ring mates with a
groove inside the differential
(Figure 17-4, Page 17-2) .
14. Repeat steps for the remaining half shaft.
2194
Figure 17-3 Separate Half Shaft from Differential
2195
Figure 17-4 Compression Ring on Spline
HALF SHAFT INSTALLATION
Half shafts are assembled with CV joints and are available only as a complete assembly. If a half shaft is replaced
because of wear, the manufacturer recommends that both half shafts be replaced.
1. Apply a light coat of anti-seize compound to each end of the half shaft splines (Figure 17-5, Page 17-3) .
Page 17-2 2016 Carryall 1500/1700 and XRT 1550 Maintenance and Service Manual