CLAS EQ 1000, Руководство пользователя, Страница: 45 / 76

45
EQ 1000
MOTORIZED WHEEL BALANCER WITH DIGITAL DISPLAY
Programmes are selected in the NORMAL mode by pressing the buttons [P4] or [P5] . At the fi rst selection of
one of these two buttons, the currently selected Programme Type will appear on the display; if within about 1.5
seconds, one of these two buttons is not pressed again, the display will return to the previous state without editing
the running Programme Type.
Depending on the running Programme Type, the following LEDs are lit on the control panel:
• Programme type LED See fi gure F1, detail [7].
• Weight Imbalance Position LED. See fi gure F1, detail [13].
Note:
The selection of the STD Programme Type removes the selection of the Static imbalance display.
The selected Programme Type also infl uences the automatic acquisition of wheel dimensions (feature available only
on some models of the machine) as shown in the Automatic acquisition column in table T3.1. The acquisition that
features only 1 sensor uses the Distance/Diameter sensor.
The position of the balancing weights along the section of the rim in the various Programme Types is shown in
Figure F3.1
F.3.1