•
If you type “Yes ”, the wizard asks a series of configuration questions. (See page 28.)
•
If you type “No”, the PC displays the following message:
Press “Enter” to start the EXTender shell…..
IMPORTANT:
We recommend that you run the setup wizard on initial power-up as the
PBX Type
needs
to be set before the unit will become operational, and the phones to initialize. This item can be accessed
at anytime by selecting:
Remote
→
Utilities
→
Setup Wizard
Gateway
→
Utilities
→
Setup Wizard
Note: If the EXTender is powered up prior to opening the terminal program, this message does not
appear.
Go to
Basic Configuration
on the next page.
Basic Configuration
Press
Ente
r. The MI
Welcome Screen
is displayed.
Figure 7:
Welcome Screen
IMPORTANT TERMINAL SETTINGS
The MI requires a screen size of 24 lines X 80 columns. Make sure the
Welcome Scr
een is bordered on
all four sides with a # symbol, as shown in the figure above.
To enlarge the screen
(within the VT-100 application)
1. Click any corner of the screen.
2. Drag the screen to enlarge.
3. Check that the screen is bordered by “#” symbols.
Press any key to continue. The
Main Menu
is displayed.
If you are already familiar with using the MI, proceed to page 23 for information on setting the parameters
for the different Network Environments.
Or
……..
Press
F1
for the MI
Help Screen,
which provides basic information for navigating through the interface.
EXTender™ IP6000 Quick Installation Guide
22
Содержание EXTender IP6000
Страница 3: ...EXTender IP6000 Quick Installation Guide 3...
Страница 4: ...EXTender IP6000 Quick Installation Guide 4...