Citel EXTender IP6000, Быстрое руководство по установке

Страница: 41 / 48

Figure 20: Default Port - 911 Analog Port Setup
3. Press
the
Æ
key to enable or disable the analog port.
4. Press the
È
key to enable Ring (ye s) on incoming analog calls
5. Access the 911 Analog Key using the following path:
Path: Remote->Configuration->Port_1-8->Port_1->More->Key Mapping
Figure 21: 911 Analog Key Mapping
5. Press the
È
key to set the numeric “key”, which must be pressed on the remote telephone before
placing an analog call.
Note: Do not use a key that already has a PBX function or feature programmed.
6. Press
the
Å
key to accept changes and go back to the Configuration Menu.
7. Press the
È
key to the Save option. Press Enter.
Setting the Make Set Busy Key
(Meridian Only)
The MSB (Make Set Busy) key sends a command from the Gateway to the PBX. This command is used
to log agents out of the ACD queue in the event of an abnormal disconnect. This prevents ACD agents
from receiving calls during a network outage. The MSB function is programmed to represent a button on
the telephone which will be pressed in the event of an abnormal disconnect. In an ACD agent application,
this key should be programmed as the Unavailable Key. In a non-ACD application, this key should be
programmed as the Hold/DND or Hold/Quick Forward Key.
Procedure
1. Go to any Port menu using the following path as an example:
Path:
Remote>Configuration->Port->Ports_1-8->Port_1
The following menu appears:
EXTender™ IP6000 Quick Installation Guide 41