Citel EXTender IP6000, Быстрое руководство по установке

Страница: 30 / 48

Example:
Using the Sporster 33.6 modem the following settings would apply:
Position Setting Function Description
1 UP DTR Normal mode Computer must provide DTR signal for
modem to accept commands: dropping DTR
terminates a call.
2 UP Verbal result codes -
3 DOWN Display result codes -
4 DOWN No echo on offline
commands Suppress echo.
5 UP Auto answer ON Modem answers on first ring, or higher.
6 UP Carrier Detect (CD) normal Modem sends CD signal when it connects
with another modem, drops CD on
disconnect.
7 DOWN Load factory defaults Loads generic template from read only
memory (ROM).
8 DOWN Smart mode Enable recognition (Smart mode).
Installing the Modem at the Remote Site
Procedure
1. Connect the analog phone line to the modem.
2. Plug the modem cable (provided with the unit) into the back of the modem.
3. Power-up the modem. The modem will run through a series of self-diagnostic tests.
4. Plug the other end of the modem cable into the port labeled “Console port” on the front of the
PBXgateway.
5. Power-up the Gateway unit. The modem status LED for “Data Terminal Ready” should be lit RED
indicating the modem is ready to receive data.
Note: Refer to the Modem User’s Guide for specific LED information.
EXTender™ IP6000 Quick Installation Guide 30