Citel EXTender IP6000, Быстрое руководство по установке

Страница: 8 / 48

•
Occasionally, your telephone company may make changes in its facilities, equipment, operation, or
procedures that could affect the operation of your equipment. If so, you will be given advance notice
of the change to give you an opportunity to maintain uninterrupted service.
•
THE REGISTRATION NUMBER OF THE SYSTEM MUST BE PROVIDED SO THAT THE
TELEPHONE COMPANY CAN ASCERTAIN INTENDED MODES OF OPERATION AND
VERIFICATION OF REGISTRATION PORT.
If a need arises in the future, the telephone company will call the user and request the following
information for any equipment being connected to the Public Switched Telephone Network:
Manufacturer : Citel Technologies
Model Number : E-6000Z-RUM08 or E-6000Z-RUM12 Refer to the nameplate on the bottom of
the unit
FCC Registration Number : Refer to the nameplate on the bottom of the unit
Ringer Equivalence Number (REN): 0.9B
Facility Interface Code (FIC): 02LS2
Universal Service Order Code (USOC): RJ11C
Telephone plug(s) : RJ11
The Ringer Equivalence Number (REN)
The FCC Registration Label, found on the bottom of the unit, includes the REN. This number is a
representation of the electrical load that will be applied to your telephone line once the unit is plugged into
your wall jack. The telephone line serving your premises will not operate properly if the total ringer load
exceeds the capability of the telephone company central office equipment. That is, if too many ringers (or
their equivalent) are connected to the line, there may be insufficient energy to ring your telephones or
activate other equipment. If the ringer load is excessive, you may also have difficulty dialing telephone
numbers.
Problems, Repair and Warranty
Should you experience trouble with this telephone equipment or for repair or warranty information, please
contact Citel Technologies, at 1-888-454-5828. If the equipment is causing harm to the telephone
network, the telephone company may request that you disconnect this equipment from the line network
until the problem has been corrected.
4. Industry Canada Statements
This digital equipment does not exceed Class B limits for radio noise emissions from digital apparatus, set
out in Radio Interference Regulation of the Industry Canada. Operation in a residential area may cause
unacceptable interference to radio and TV reception requiring the owner or operator to take whatever
steps necessary to correct the interference.
Models E-6000Z-RUMxx
This product meets the applicable Industry Canada technical specifications.
When equipped with the optional Analog card, a Registration Number is printed on the product
nameplate, located on the bottom of this equipment. This certification means that the equipment meets
certain telecommunications network protective, operations, and safety requirements as prescribed in the
appropriate Terminal Equipment Technical Requirements document(s). The Industry Canada does not
guarantee the equipment will operate to the user's satisfaction.
Before installing this equipment, users should ensure that it is permissible to be connected to the facilities
of the local telecommunications company. The equipment must also be installed using an acceptable
method of connection. The customer should be aware that compliance with the above conditions may not
prevent degradation of service in some situations.
Repairs to certify equipment should be made by a Citel Technologies authorized maintenance facility.
Any repairs or alterations made by the user to this equipment, or equipment malfunctions, may give the
telecommunications company cause to request the user to disconnect the equipment. Users should
EXTender™ IP6000 Quick Installation Guide 8