Citel EXTender IP6000, Быстрое руководство по установке

Страница: 23 / 48

Installation Environment
This section provides the necessary information to configure the EXTender using the MI. The units are
programmed at the factory with “default” settings providing basic parameters to accommodate most
network environments.
Before beginning the configuration process, identify the network device type that is
connected to the EXTender. Once you know the connection type, use Figure 5: Which type of
Network
Device do you
have?
Back
of Unit (LAN Connections), to determine the appropriate checklist to use for
configuration.
Table 5: Network Devices
To configure the EXTender with....... See page...
a Synchronous -serial device via WAN Port(s) 1 or 2 (RVP_Direct) using one of the
following protocols: 24
•
V. 35
•
RS-232
•
RS-530
an Asynchronous -serial device via WAN Port(s) 1 or 2 (RVP_Direct) using RS-232
Protocol. 25
an IP device – via Ethernet port (RVP_IP). 27
* IP-based products utilize VOIP technology to deliver remote voice solutions. The
voice quality of these solutions is dependent on variables such as available bandwidth,
network latency and quality of service (QoS) initiatives, all of which are controlled by
the network and internet service providers. Because these variables are not our
control, we cannot guarantee the performance of the user’s IP-based remote voice
solution.
EXTender™ IP6000 Quick Installation Guide 23