Citel EXTender IP6000, Быстрое руководство по установке

Страница: 40 / 48

Setting up the Analog Port
Note: When using the Analog Port ensure that you selected the correct region using the Setup Wizard
(see page 28).
The EXTender 6000 may be equipped with an extra RJ-11 port on the back panel. This port is labeled
“Analog” and it provides a connection to an analog telephone line (provided at the remote location) for the
purpose of placing local or emergency calls.
Once the unit is connected to the analog line, the remote user simply presses the assigned key on the
digital telephone and dials the telephone number. Only one remote user can dial out at any one time.
IMPORTANT NOTES:
•
If power to the remote unit fails, the Analog port is not available to the digital telephones.
•
If another telephone tries to use the analog line while it is busy, it hears a “Busy” tone.
•
The set will display “In Use” and list what port is currently using the Analog Port.
Procedure
1. Select Analog Card using the following path:
Path: Remote->Configuration->Port_1-8->Port_1->More->911_Analog_Port
The following menu appears:
Figure 19: Individual Port – 911 Analog Port Setup
2. Press the
Æ
key to enable (Yes) analog port access for all 8 or 12 ports, or press the
↓
key to set
individual ports. You may also set this in the Default Port menu and have all other ports read from this
as the <Default>.
Note: This procedure sets the <Default> setting for all ports.
EXTender™ IP6000 Quick Installation Guide 40