3-7
Cisco SFS 3504 Multifabric Server Switch Hardware Installation Guide
OL-14325-01
Chapter 3 Installing the Cisco SFS 3504 Server Switch
Mounting the Cisco SFS 3504 Server Switch on a Rack
Step 5
Adjust the adjustable brackets so that the holes in the brackets align with the holes in the rack posts, and
secure the brackets to the rack posts (see
Figure 3-2
).
Use
four standard rack screws (two for each bracket; rack screws not included in the accessory kit) to
secure the adjustable brackets to the rack posts.
Note
The least amount of protrusion for the adjustable brackets must be 1/2 inch beyond the inside
end of the guide rail. The adjustable bracket should always be fully supported by the guide rails.
Installing with the Data-Connection Cables Flush-front
To install the Cisco SFS 3504 Server Switch on a rack so that the data-connection cables are flush front
to the rack posts, perform the following steps:
Step 1
Open the bag that contains the mounting hardware.
Note
To mount a Cisco SFS 3504 Server Switch on a rack, use eight screws and eight nuts. These must
be supplied by the customer, based upon the compatibility of the screws and nuts with the
specific rack.
