3-10
Cisco SFS 3504 Multifabric Server Switch Hardware Installation Guide
OL-14325-01
Chapter 3 Installing the Cisco SFS 3504 Server Switch
Mounting the Cisco SFS 3504 Server Switch on a Rack
Figure 3-5
Sliding the Cisco SFS 3504 Server Switch Between Rack Posts and Inserting Brackets
Step 5
Slide the two adjustable brackets, from the back, between each of the guide rails that are attached on
either side of the Cisco SFS 3504 Server Switch at the power-fan modules end (see
Figure 3-5
).
Step 6
Adjust the adjustable brackets so that the holes in the brackets align with the holes in the rack posts, and
secure the adjustable brackets to the rack posts (see
Figure 3-5
).
Use
four standard rack screws (two for each bracket; rack screws not included in the accessory kit) to
secure the adjustable brackets to the rack posts.
Note
The least amount of protrusion for the adjustable brackets must be 1/2 inch beyond the inside
end of the guide rail. The adjustable bracket should always be fully supported by the guide rails.
241650
Cisco SFS3504 Mul
tifabric S
witch
!
OK
1
2
3
4
5
6
7
8
9
10
11
12
TX/RX
Link
D
SFS3500 Ser
ies FC Gate
way
!
OK
1
2
3
4
Fault
Link
SFS3500 Seri
es Ethernet G
ateway
!
OK
1
2
3
4
5
6
TX/RX
Link
100/1000B
ase T
