6-66
Cisco MGX 8850 Routing Switch Command Reference
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Chapter 6
Logical Node, Port, and Signaling Commands
dspatmaddr
dspatmaddr
Display ATM Addresses—displays active ATM addresses on a port.
The output of dspatmaddr includes configured ATM addresses, configured ILMI address prefixes, and
ATM addresses registered by way of the ILMI address registration procedure.
Cards on Which This Command Runs
PXM45
Syntax
dspatmaddr <portid>
Syntax Description
Related Commands
dspaddr
Attributes
Examples
Display the ATM addresses and prefixes on port 2:1.1:1.
Geneva.7.PXM.a > dspatmaddr 2:1.1:1
Port Id: 2.1
Configured Port Address(es):
39.840f.8011.3744.0000.0040.1005.3456.7834.7777.77
length: 160
type: internal
proto: local
scope: 0
plan: nsap-dcc
redistribute: false
ILMI Configured Port Prefix(es):
47.0091.8100.0000.0000.0ca7.9e01
88.8888.8888.0000.0000.0000.0000
ILMI Registered Port Address(es):
47.0091.8100.0000.0000.0ca7.9e01.1234.5678.9012.34
88.8888.8888.0000.0000.0000.0000.1234.5678.9012.34
length: 160
type: internal
proto: local
scope: 0
plan: nsap-dcc
redistribute: false
Geneva.7.PXM.a >
portid
The portid is the PNNI physical port. The format is [shelf.]slot[:subslot].port[:subport]. See
also
PNNI Format, page 6-4
.
Log: log
State: active, standby
Privilege: ANYUSER