manualshive.com logo in svg

Cisco MGX 8850, Справочник по командам

Cisco MGX 8850 - высокопроизводительный мультиплексор, обеспечивающий широкий спектр сетевых услуг. Для более глубокого понимания функционала устройства, рекомендуется скачать бесплатный "Command Reference Manual" с официального сайта производителя. manualshive.com - ваш источник документации для Cisco MGX 8850.

Поделиться
Скачать
background image

3-61

Cisco MGX 8850 Routing Switch Command Reference

Release 2.0, Part Number 78-10467-04 Rev C0, October 2001

Chapter 3

Equipment and Resource Provisioning

dspcdsct

Display the Class of Service Buffer parameters for SCT 2. Note the following:

•

Min-Rate and Max-Rate do not apply in the current product.

•

Excess-Priority is a scheme for distributing excess bandwidth. The lowest number is the highest 
priority for a connection to receive excess bandwidth. If two or more connections have equal 
priority, the excess bandwidth is equally distributed between them.

•

Explicit Rate Stamping (ERS) applies to only ABR connections.

Cell loss ratio (CLR) is currently hard-coded, so do not attempt to modify it through the Cisco WAN 
Manager application or the CLI commands.

MGX8850.1.AXSM.a > dspcdsct cosb

+-----------------------------------------------------------------------------------+

|Service Class Template [02] : COSB Parameters

+-----------------------------------------------------------------------------------+

| COSB | MIN-RATE | MAX-RATE | MIN-PRIORITY | EXCESS-PRIORITY | ERS ENABLE |  CLR   |

+-----------------------------------------------------------------------------------+

| 0001 | 00000000 | 00000100 |          000 |             002 |    DISABLE | 10^-06 |

| 0002 | 00000000 | 00000100 |          000 |             002 |    DISABLE | 10^-06 |

| 0003 | 00000000 | 00000100 |          000 |             000 |    DISABLE | 10^-10 |

| 0004 | 00000000 | 00000100 |          000 |             001 |    DISABLE | 10^-08 |

| 0005 | 00000000 | 00000100 |          000 |             001 |    DISABLE | 10^-06 |

| 0006 | 00000000 | 00000100 |          000 |             002 |    DISABLE | 10^-06 |

| 0007 | 00000000 | 00000100 |          000 |             002 |    DISABLE | 10^-06 |

| 0008 | 00000000 | 00000100 |          000 |             002 |    DISABLE | 10^-06 |

| 0009 | 00000000 | 00000100 |          000 |             002 |    DISABLE | 10^-06 |

| 0010 | 00000000 | 00000100 |          000 |             002 |    DISABLE | 10^-06 |

| 0011 | 00000000 | 00000100 |          000 |             002 |    DISABLE | 10^-06 |

| 0012 | 00000000 | 00000100 |          000 |             002 |    DISABLE | 10^-06 |

| 0013 | 00000000 | 00000100 |          000 |             002 |    DISABLE | 10^-06 |

| 0014 | 00000000 | 00000100 |          000 |             002 |    DISABLE | 10^-06 |

| 0015 | 00000000 | 00000100 |          000 |             002 |    DISABLE | 10^-06 |

| 0016 | 00000000 | 00000100 |          000 |             000 |    DISABLE | 10^-06 |

+-----------------------------------------------------------------------------------+

Display VC thresholds for SCT 2. Note the following:

The Scaling COSB value applies to congestion in a Class of Service Buffer: if a buffer gets congested, 
this factor determines how quickly the node throttles back the rate at which cells enter the buffer.

The Scaling Log-If is a scaling factor that applies to congestion on a port: when the port gets congested, 
this factor determines the rate at which the node throttles back traffic (until the port is uncongested).

MGX8850.1.AXSM.a > dspcdsct vcThr

+---------------------------------------------------------------------------------------------------------+

Service Class Template [2] : VC Threshold Parameters

+---------------------------------------------------------------------------------------------------------+

| SERV-TYPE | VC THRESH | PACKET |  MAX_CELL  |  EFCI   | CLP_HI  |  EPD0   | CLP_LO  | SCALING | SCALING |

|           | TBL IDX   |  MODE  |   THRESH   |         |         |         |  EPD1   |  COSB   |  Log-If |

+---------------------------------------------------------------------------------------------------------+

| VSI-SIG   |     225   |   DSB  | 0000005000 | 1000000 | 0800000 | 0600000 | 0800000 | 0000002 | 0000002 |

| CBR.1     |     226   |   DSB  | 0000002500 | 1000000 | 0800000 | 0600000 | 0800000 | 0000001 | 0000001 |

| VBR-RT.1  |     227   |   DSB  | 0000005000 | 1000000 | 0800000 | 0600000 | 0800000 | 0000002 | 0000002 |

| VBR-RT.2  |     228   |   DSB  | 0000005000 | 1000000 | 0800000 | 0600000 | 0800000 | 0000002 | 0000002 |

| VBR-RT.3  |     229   |   DSB  | 0000005000 | 1000000 | 0800000 | 0600000 | 0800000 | 0000002 | 0000002 |

| VBR-nRT.1 |     230   |   DSB  | 0000025000 | 1000000 | 0800000 | 0600000 | 0800000 | 0000002 | 0000002 |

| VBR-nRT.2 |     231   |   DSB  | 0000025000 | 1000000 | 0800000 | 0600000 | 0800000 | 0000002 | 0000002 |

| VBR-nRT.3 |     232   |   DSB  | 0000025000 | 1000000 | 0800000 | 0600000 | 0800000 | 0000002 | 0000002 |

| UBR.1     |     233   |   DSB  | 0000050000 | 1000000 | 0800000 | 0600000 | 0800000 | 0000004 | 0000004 |

| UBR.2     |     234   |   DSB  | 0000050000 | 1000000 | 0800000 | 0600000 | 0800000 | 0000004 | 0000004 |

| ABR       |     235   |   DSB  | 0000050000 | 0200000 | 0800000 | 0600000 | 0800000 | 0000003 | 0000003 |

| CBR.2     |     236   |   DSB  | 0000002500 | 1000000 | 0800000 | 0600000 | 0800000 | 0000001 | 0000001 |

| CBR.3     |     237   |   DSB  | 0000002500 | 1000000 | 0800000 | 0600000 | 0800000 | 0000001 | 0000001 |

Содержание MGX 8850



















































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для MGX 8850

Makita RF1101 Parts Breakdown preview
RF1101
Бренд: Makita Страницы: 2
Patton electronics 1090 Service Manual preview
1090
Бренд: Patton electronics Страницы: 8
Parkside POF 1200 A1 Operation Manual preview
POF 1200 A1
Бренд: Parkside Страницы: 55
Parkside POF 1200 A1 Operation And Safety Notes preview
POF 1200 A1
Бренд: Parkside Страницы: 34
Javad TRIUMPH-3NR User Manual preview
TRIUMPH-3NR
Бренд: Javad Страницы: 35
DCE ANS-205 User Manual preview
ANS-205
Бренд: DCE Страницы: 5
Cypress PSoC 4 S Series Quick Start Manual preview
PSoC 4 S Series
Бренд: Cypress Страницы: 4
ACTi LPR-100 Quick Installation Manual preview
LPR-100
Бренд: ACTi Страницы: 14
Xantech IR-X10 Installation Instructions Manual preview
IR-X10
Бренд: Xantech Страницы: 16
ZyXEL Communications GS1100-10HP User Manual preview
GS1100-10HP
Бренд: ZyXEL Communications Страницы: 30
Modecom MC-421 Quick Installation Manual preview
MC-421
Бренд: Modecom Страницы: 16
Toto Link ND300V2 Manual preview
ND300V2
Бренд: Toto Link Страницы: 57
Westermo LRW-112 Series Manual preview
LRW-112 Series
Бренд: Westermo Страницы: 28
SMC Networks SMCGS10P-Smart Installation Manual preview
SMCGS10P-Smart
Бренд: SMC Networks Страницы: 68
3Com 3C13755-US - Router 5642 Installation Manual preview
3C13755-US - Router 5642
Бренд: 3Com Страницы: 104
BinTec BIANCA/BRICK XS Quick Install Manual preview
BIANCA/BRICK XS
Бренд: BinTec Страницы: 2
National Datacomm 9210S01 User Manual preview
9210S01
Бренд: National Datacomm Страницы: 62
Billion BiPAC 7700N User Manual preview
BiPAC 7700N
Бренд: Billion Страницы: 168

Бренды по названию

Популярные бренды

Загрузить еще бренды