11-9
Cisco MGX 8850 (PXM1E/PXM45), Cisco MGX 8950, Cisco MGX 8830, and Cisco MGX 8880 Configuration Guide
Release 5.0.10, OL-3845-01 Rev. B0, August 16, 2004
Chapter 11 Viewing and Responding to Alarms
Displaying Alarm Reports in the CLI
Enter the dspimalnkalms command to display alarm state information for all IMA links on the current
PXM1E-16-T1E1 or AXSM-32-T1E1-E, as shown in the following example.
Unknown.7.PXM.a >
dspimalnkalm
s
Link Number : 2.5
Alarm State : Lif Fail
Enter the dspimalnkalm <bay.line> command to display alarm state information for a specific IMA
link. Replace bay with the 2 to specify the lower bay. Replace line with number of the line whose alarm
status you want to view.
Note
On the PXM1E, the bay number is always 2.
In the following example, the user displays alarm information for the IMA group 5 in the lower bay.
Unknown.7.PXM.a >
dspimalnkalm
2.5
Link Number : 2.5
Alarm State : Lif Fail
Note
The commands in this section apply to the AXSM-32-T1E1-E and the PXM1E-16-T1E1 only. For
information on the commands used to display alarms on AUSM-8-T1E1/B cards, refer to the Cisco ATM
Services (AUSM/MPSM) Configuration Guide and Command Reference for MGX Switches, Release 5.
Displaying License Alarms
Enter the dsplicalms command to display alarm state information for MPSM feature licenses. For
example:
M8830_CH.1.PXM.a >
dsplicalms
M8830_CH System Rev: 04.09 Mar. 08, 2004 09:31:25 GMT
MGX8830 Node Alarm: CRITICAL
Slot Critical Major Minor || Slot Critical Major Minor
---- -------- ------- ------- || ---- -------- ------- -------
1 0 0 0 || 8 0 0 0
2 0 0 0 || 9 0 0 0
3 0 0 0 || 10 0 0 0
4 0 0 0 || 11 0 0 0
5 0 0 0 || 12 0 0 0
6 0 0 0 || 13 0 0 0
7 0 0 0 || 14 0 0 0
