Cisco ME 3600X, Справочник по командам

Страница: 406 / 628

-130
Cisco ME 3800X and ME 3600X Switch Command Reference
OL-28238-01
Chapter
show parser macro
show parser macro
To display the parameters for all configured macros or for one macro on the switch, use the show parser
macro command in user EXEC mode.
show parser macro [{ brief | description [ interface interface-id ] | name macro-name }] [ | { begin
| exclude | include } expression ]
Syntax Description
Command Modes User EXEC
Command History
Usage Guidelines
Expressions are case sensitive. For example, if you enter | exclude output , the lines that contain output
do not appear, but the lines that contain Output appear.
Examples
This is a partial output example from the show parser macro command:
Switch# show parser macro
Total number of macros = 2
--------------------------------------------------------------
Macro name : sample-macro1
Macro type : customizable
duplex full
speed auto
mdix auto
--------------------------------------------------------------
Macro name : test1
Macro type : customizable
no shutdown
flowcontrol receive on
speed 100
--------------------------------------------------------------
brief (Optional) Displays the name of each macro.
description [ interface
interface-id ]
(Optional) Displays all macro descriptions or the description of a specific
interface.
name macro-name (Optional) Displays information about a single macro identified by the
macro name.
| begin (Optional) Display begins with the line that matches the expression .
| exclude (Optional) Display excludes lines that match the expression .
| include (Optional) Display includes lines that match the specified expression .
expression Expression in the output to use as a reference point.
Release Modification
12.2(52)EY This command was introduced.