Cisco ME 3600X, Справочник по командам

Страница: 168 / 628

2-144
Cisco ME 3800X and ME 3600X Switch Command Reference
OL-28238-01
Chapter 2 Cisco ME 3800X and ME 3600X Switch Cisco IOS Commands
logging file
Usage Guidelines The log file is stored in ASCII text format in an internal buffer on the switch. You can access logged
system messages by using the switch command-line interface (CLI) or by saving them to a properly
configured syslog server. If the switch fails, the log is lost unless you had previously saved it to flash
memory by using the
logging file flash: filename global configuration command.
After saving the log to flash memory by using the logging file flash: filename global configuration
command, you can use the more flash: filename privileged EXEC command to display its contents.
The command rejects the minimum file size if it is greater than the maximum file size minus 1024; the
minimum file size then becomes the maximum file size minus 1024.
Specifying a level causes messages at that level and numerically lower levels to be displayed.
You can verify the configuration by entering the show running-config privileged EXEC command.
Examples This example shows how to save informational log messages to a file in flash memory:
Switch(config)# logging file flash:logfile informational
Related Commands Command Description
show running-config Displays the operating configuration.