5-20
Cisco 1240 Connected Grid Router Hardware Installation Guide
OL-26223-04
Chapter 5 Mounting the Router
Mounting Instructions
To install and secure the security panel to the bracket and router, follow these steps:
Step 1
Loosen the captive bolt that is located inside router door lock post. For lock post location, see
Figure 4-6
in the
“Opening the Router Chassis”
chapter.
Step 2
Install the security panel on the bracket by inserting the security panel tabs into the corresponding slots
on the bracket as shown in
Figure 5-17
.
Note
For clarity, the router is not shown here. During this procedure, the router will be mounted in the
bracket.
Figure 5-17
Assemble Bracket and Security Panel
Step 3
Swing the panel shut over the bracket, aligning the three screw holes on the panel with the corresponding
holes on the bracket.
300618
