6 Setting up the 3D scanner system
3DPIXA
CD40131 Version 1
73 / 99
7. If the white reference mark is not displayed at the brightest area of the image, move it
accordingly:
– In the
Camera Settings
select
White reference mark
in the
Camera parameter
folder.
– In the
First relative pixel of white reference (A1)
field modify the value in order to
move the white reference mark as shown in Fig. 45, p. 73.
The new position of the white reference mark will be shown after saving the new
value in the volatile memory of the camera by selecting the appropriate toolbar icon or
by pressing the F9 key.
Fig. 45: Adjusting the white reference mark
1
Moving the white reference mark rightwards by increasing the value
2
Moving the white reference mark leftwards by decreasing the value
8. Hide the white reference mark:
– Remove the checkmark in the
Display white reference borders in the image
box.
– Save the setting in the non-volatile memory of the camera.
9. Repeat the previous steps for the second camera.
10. In the
Camera Settings
select
White control
in the
Camera parameter
folder.
11. Set the checkmark in the
Enable continuous white control
box.
12. Select the refresh icon in the toolbar.
