6 Setting up the 3D scanner system
3DPIXA
CD40131 Version 1
69 / 99
7. If the white reference marks are not displayed at the brightest areas of the images, move
them accordingly:
– In the
Camera Settings
select
White reference mark
in the
Camera parameter
folder.
– In the
First relative pixel of white reference (A1)
field modify the value in order to
move the white reference marks as shown in Fig. 40, p. 69.
The new positions of the white reference marks will be shown after saving the new
value in the volatile memory of the camera by selecting the appropriate toolbar icon or
by pressing the F9 key.
Fig. 40: Adjusting the white reference marks
1
Moving the white reference marks inwards by increasing the value
2
Moving the white reference marks outwards by decreasing the value
8. Hide the white reference marks:
– Remove the checkmark in the
Display white reference borders in the image
box.
– Save the setting in the non-volatile memory of the camera.
9. In the
Camera Settings
select
White control
in the
Camera parameter
folder.
10. Set the checkmark in the
Enable continuous white control
box.
11. Select the refresh icon in the toolbar.
