Chevrolet Aveo 2016, Руководство пользователя

Страница: 265 / 325

Service and Maintenance
. . . 264
5. Gently push in and turn the
bulb counterclockwise to
remove it from the socket.
6. Reverse the steps to install a
new bulb.
When installing the new bulb
into the socket, press it in
while turning it clockwise.
When installing the socket into
the housing, rotate the socket
clockwise.
Front Fog Lights (If equipped)
CAUTION
Performing this vehicle
maintenance procedure
requires special skills, tools and
equipment.
It is recommended that you
have your dealer perform this
service.
Before attempting any service
procedure yourself, make sure
that you are very familiar with it
and that you are confident you
can complete it safely.
Otherwise, you could be
injured or your vehicle could be
damaged.
Side Turn Signal Lights
(If equipped)
1. Pull the light assembly
forward and remove it.
2. Turn the bulb socket counter-
clockwise.
3. Pull the bulb straight out to
remove it from the socket.
09Aveo_T255_GenR.fm Page 264 Wednesday, February 13, 2008 1:49 PM
265 . . .
–
–
–
–
Section 4
4. Reverse the steps to install a
new bulb.
When installing the new bulb
into the socket, press it in
while turning it clockwise.
Make sure to push the light
assembly back to its original
position.
Taillights, Stoplights, Back-up
Lights, Rear Fog Lights and Rear
Turn Signals
1. Open the trunk or liftgate.
2. Remove the two screws
holding the light assembly.
3. Turn the bulb socket counter-
clockwise to remove it.
4. Gently push in and turn the
bulb counterclockwise to
remove it from the socket.
5. Reverse the steps to install a
new bulb.
When installing the new bulb
into the socket, press it in
while turning it clockwise.
When installing the socket into
the housing, rotate the socket
clockwise.
09Aveo_T255_GenR.fm Page 265 Wednesday, February 13, 2008 1:49 PM