Chevrolet 1977 light duty truck, Руководство по обслуживанию

Страница: 138 / 861

Fig. 2D-22 -Door Hinge
3. Foreward and R e a rw a rd -T o make this adjust­
ment, loosen striker bolt, shim to desired position, and
tighten bolt securely.
F R O N T DOOR ASSEMBLY
R eplacem ent
R em ove the door assembly from the body by
rem oving the hinges from the door.
D O O R H IN G E
T he d oor check is p a rt o f the front door upper
hinge. The fro n t d oor torque rod check holds the door in
e ith e r o f two positions between full open and closed. The
Fig. 2D-24--Typical S trike r Bolt A d ju stm e nt
front door check-hinge assembly is replaced as a
complete unit as follows. See figure 2D-22.
Removal
1. Loosen front fender rear bolts.
2. With special Tool J-22585 remove 3 bolts
securing fro n t door upp er hinge to cowl pillar.
a. Remove the door to upper hinge retaining
bolts.
b. With aid o f an assistant to support weight of
door, remove the door to lower hinge retaining bolts and
remove door.
Installation
1. Install hinge snugly on pillar in same location as
hinge removed.
2. W ith the aid o f an assistant fasten the door to
the hinge.
3. Adjustm ent o f the door lock and striker plate
should be m ade after the door is positioned in the
opening.
DOOR T R IM PANELS - CK M ODELS
D oor trim panel installation is illustrated in Fig.
2D-25.
DOOR V E N T IL A T O R ASSEM BLY-Fig. 2D -26
Removal
N OTE: The channel between the door window
glass and door vent is removed as p a rt o f the vent
assembly.
1. Regulate the door window glass to the full down
position.
2. Remove clip from the window regulator handle,
and knob from lock rod.
3. Remove arm rest screws and rim panel. See
figure 2D-27.