Chevrolet 1977 light duty truck, Руководство по обслуживанию

Страница: 124 / 861

Fig. 2C-17--Running Boards—CK Series
S H EET M E T A L C H E C K IN G
R efer to the sheet metal checking illustration figure
2C-18 for p ro p e r gaps an d hood adjustments.
Fender Skirt - P Series
R efer to figure 2C-19 for removal and installation
o f fe n d e r skirt, brackets, re a r supports and hangers.
W O O D G R A IN A P P LIQ U E
IN S T A L L A T IO N PR O C ED U R E
Genera!
The wood grain applique (transfer film) is a vinyl
m aterial with a pressure sensitive adhesive backing. The
transfers are serviced in pre-cut panels. The transfers are
designed with an appealing wood grain p attern and a 50
degree or semi-gloss finish.
P re p a ra tio n o f the surface to which the tran sfer will
be applied is very im portant. In cases where body metal
re p a ir has been m ade it is necessary to prime and color
coat these areas to blend with the u n d a m a g e d surface.
Fig. 2C-18 Front End Sheet M etal Checking—G
Series
Apply the tran sfer film to color coated panels only, never
to b are metal or primer.
T he surface must be free o f any im perfections that
m ight high-light through the film. Remove dirt nibs and
other foreign m aterial in the paint by light sanding with
600 grit sandpaper.
The tem perature o f the body must be m a in ta in e d at
a m oderate level between approxim ately 70 and 90
degrees. Too w arm a body will cause the wood grain film
to stick prem aturely while too cool a body will reduce the
adhesion o f the wood grain film. Cool the body panel
with cool water w hen too warm and heat the body panel
with a heat gun or a heat lam p w hen too cold.
T ransfers should not be replaced in temperatures
below 65 degrees F ahrenheit. The tran sfer should not be
subjected to tem perature greater than 175 °F and should
not be left at or near this tem perature for extended
periods o f time.
COWL TO HOOD
3 / 1 6
±
1 /3 2
NOTE
H o o d s u r f a c e flu sh to 1 / 1 6
b e l o w c o w l v e n t g r i l l e a n d c o n s t a n t
f r o m (£_ to h o o d r e a r c o r n e rs .
FENDER TO COWL
1 /1 6 GAP (Ref)
NOTE
C o w l v e n t g r i l l e
NOTE
Full r a n g e o f g a p t o l e r a n c e s d o n o t a p p l y to
a n y o n e g a p . C l e a r a n c e s to b e h e l d u n i f o r m l y w i t h i n
t h e r a n g e o f g o o d a s s e m b l y p r a c t i c e s . A p p e a r a n c e s
d i c t a t e t h a t g a p c l e a r a n c e s s h o u l d b e p a r a l l e l .
NOTE
H o o d s u r f a c e f lu sh to 1 / 1 6 b e l o w f e n d e r a t r e a r
c o r n e r a n d b e c o m e f lu sh a t f r o n t o f h o o d .
FENDER TO HOOD
3 / 1 6 ± 1 /3 2 GAP