Chevrolet 1977 light duty truck, Руководство по обслуживанию

Страница: 150 / 861

Fig. 2D-55 W eatherstrip--L.H. and R.H. Rear Door
ENDGATES (06 AND 14)
Coach models (06) and utility models (14) use
endgates o f similar, yet distinct design. Separate
procedures follow for service on each o f these endgates.
E N D G A T E ASSEMBLY - ( 0 6 ) MODELS ONLY
Replacem ent
1. Lower endgate, and removed hinge access
covers. See figure 2D-56.
2. Remove endgate-to-hinge bolts.
3. Remove L.H. torque rod bracket, shown in
figure 2D-57.
4. If e quipped with electric powered window,
disconnect w iring harness.
5. L ift endgate to alm ost closed position and
rem ove support cables.
6. Remove endgate with torque rod.
7. To install, reverse removal procedure.
HINGES
Replacement
If necessary to remove hinges, remove endgate as
outlined previously, an d proceed as follows:
1. Remove bolts from each o f the hinge assemblies
on the underside o f the body. See figure 2D-56.
2. Remove hinge assemblies. I f the hinge pins are
to be removed, note the position o f bushings so they may
be reinstalled in the same position.
3. Reverse procedure to install.
EN D G A TE DISASSEMBLY
1. Remove access cover shown in figure 2D-58, to
gain access to in terior components.
2. Detach rem ote control rods from lock assembly
by rem oving clips.