Chattanooga Revolution Wireless Скачать руководство пользователя страница 52 | Manualshive

Страница: 52 / 53

background image

WARANTY

51

WARANTY

DJO GLOBAL ("Company") warrants that the Chattanooga® Revolution Wireless ("Product") is free of defects in material and
workmanship. This warranty shall remain in effect for two years (24 months) from the date of original consumer purchase.
If this Product fails to function during the two year warranty period due to a defect in material or workmanship, at the
Company's Option, Company or the selling dealer will repair or replace this Product without charge.

All repairs to the Product must be performed by a service center certified by the Company. Any modifications or repairs
performed by unauthorized centers or groups will void this warranty.

There is no warranty on electrodes and USB cable.

This warranty does not cover:

•

Replacement parts or labor furnished by anyone other than the Company, the selling dealer or a certified Company
service technician.

•

Defects or damage caused by labor furnished by someone other than Company, the selling dealer or a certified
Company service technician.

•

Any malfunction or failure in the Product caused by product misuse, including, but not limited to, the failure to
provide reasonable and necessary maintenance or any use that is inconsistent with the Product User Manual,
especially breaks due to drops of the device.

COMPANY SHALL NOT BE LIABLE IN ANY EVENT FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES.

Some areas do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or
exclusion may not apply to you.

To obtain service from Company or the selling dealer under this warranty:

1.

A written claim must be made within the warranty period to the Company or the selling dealer. Written claims made to

the Company should be sent to:

DJO, LLC

1430 Decision St.

Vista, CA 92081

2.

The Product must be returned to the Company or the selling dealer by the owner.

This warranty gives you specific legal rights and you may also have other rights which vary from region to region.

The Company does not authorize any person or representative to create for it any other obligation or liability in connection
with the sale of the Product. Any representation or agreement not contained in the warranty shall be void and of no effect.

THE FOREGOING WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED,

INCLUDING ANY WARRANTY OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

«
...
50
51
52
53
»

Содержание Revolution Wireless






















































Отзывы:

Нет отзывов

Похожие инструкции для Revolution Wireless

Бренд: York Fitness Страницы: 34

Бренд: MacDon Страницы: 2

Бренд: MacDon Страницы: 214

Бренд: MacDon Страницы: 32

Бренд: 4iiii Страницы: 36

Бренд: 4iiii Страницы: 34

Бренд: 4EVAC Страницы: 27

Бренд: ParaBody Страницы: 5

Бренд: Baileigh Industrial Страницы: 28

Бренд: Baileigh Industrial Страницы: 56

Бренд: Raven Страницы: 17

Бренд: Campbell Страницы: 12

Бренд: Hanna Instruments Страницы: 2

Бренд: Hanna Instruments Страницы: 2

Бренд: Hanna Страницы: 12

Бренд: Hanil Страницы: 24

Бренд: Hanil Страницы: 32

Бренд: Hanil Страницы: 24

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды