Champion UH-200, Техническое руководство

Страница: 27 / 139

18
2.9 Chemical Connections (Cont.)
2.9.1 General (All Models) Cont.
!! ATTENTION CHEMICAL SUPPLIER !!
(continued from previous page)
6. Refer to Fig. 2.9.2 showing the Fill/Chemical Dispenser Circuit Board.
7. There are (4) adjustable potentiometers.
• Fill- 2 to 40 seconds
• Detergent- 1 to 30 seconds
• Sanitizer- 1 to 30 seconds
• Rinse aid- 1 to 30 seconds
8. Two dots on one end of the potentiometer
serve as the dial pointer.
9. Turn CW to increase time setting.
NOTE:
The graduated numbers
(0-10) around the potentiometers
DO NOT correspond to time settings.
Use them for position reference only,
not an actual time setting indication.
Refer to Section 2.9.2 for specific adjustments and chemical priming
instructions for your model dishwasher.
10. Refer to Fig. 2.9.3. showing the recommended chemical bottle placement.
Bottles may be placed on either side of the dishwasher.
11. Bottles must be placed no farther than
6 ft. [1829mm] from the machine.
12. I.D. tags identify chemical tubing.
13. Pick-up tubes are inserted directly
in chemical bottles.
Part 2: INSTALLATION
Figure 2.9.3
Chemical Bottle Placement
Floor
cut away
to show rear
Route chemical tubing
through rear access
hole above fill and
drain hose access
Max.
6 ft.
[1829mm]
Figure 2.9.2
Fill/Chemical Dispenser Circuit Board
FILL DETERGENT SANITIZER RINSE
AID
9 1
5
6 4
3 7
2 8
0 10
9 1
5
6 4
3 7
2 8
0 10
9 1
5
6
4
3 7
2 8
0 10
9 1
5
6 4
3 7
2 8
0 10
9 1
5
6
4
3
7
2 8
0 10
DOTS ON END
OF POTENTIOMETER
I
.
D
.
TAG
INSERT PICK
-
UP
TUBE IN BOTTLE