99
Part 8:
COMPONENT REPAIR AND REPLACEMENT
8.2.14 Door Shock and Hinge
(All Models)
All dishwasher models utilize (2) twin seal gas-operated
shocks for the door. The shocks serve the same purpose
as a conventional door spring on other machines.
The advantage of the shock is smoother door
operation and a softer, more controlled door
closure than door spring designs.
Preparation for Repair:
1. Push the POWER pushbutton off, if
machine is ON, to enter auto-shutdown.
2. Turn off main incoming power.
3. Pull the machine out if required to
gain access to side.
4. Remove front and side panels.
5. Close door fully.
To replace a door shock:
1. Remove the upper cotter pin and
washer.
2. Remove shock from upper pin and
let shock hang from hinge assembly.
3. Use a 5/32" allen wrench to
remove the hinge retaining screw.
4. Gently pry the hinge out of the door
assembly.
5. Remove the lower cotter pin and
washer.
6. Reassemble in reverse order.
7. Check door operation and return
machine to service.
1
3
4
5
Door
Shock
Door
Hinge
2
Содержание UH-200
