5. Disable faults for testing:
At the main screen press the
alt
and
i
keys to bring up the real-time I/O display as shown in
Figure 4.1.5.
Using the arrow keys, move the selection box to the top left of the inputs.
The screen should read “INP1:
Ax1_MinusLimitOK
” as circled below.
Press the
ctrl, alt
and
i
keys simultaneously to invert this input.
The LED will turn from red to green and a line will be drawn over the top.
Repeat the process until inputs
1-11
and inputs
17-20
are
green
as shown below.
6. Label the Axes:
From the main menu press
F1 Setup → F3 Config.
Password is
137
. Press
F2 Mach
. →
F2 Motor
.
Under
Label
all axes should be set to
N
to disable the axis for bench testing as seen in Figure 4.1.6.
7. Save:
Press
F10 Save
.
Page 21 of 72
4.1 Bench Test – CNC11 Software Configuration
T:\_Docs working\Oak Board Manual\Oakboard install manual V2 4-10-15.odt
Figure 4.1.5
Inverting inputs using ctrl + alt + i
Figure 4.1.6
Labeling the axes
Содержание OAK
Страница 3: ......
