8 - SPECIFICATIONS
Control valve
Four control valve sections for right-hand travel, boom/bucket and arm acceleration.
Five control valve sections for left-hand travel, swing, arm, auxiliary attachment and boom acceleration.
Boom/arm load holding valves.
Swing
Fixed flow, piston-type pump
Automatic disk brake
Upperstructure swing speed
10.0 RPM
Travel
Two speed hydraulic motors with axial pistons
Planetary reduction gears
Low speed
0 - 3.2 km/h
(
0.0 - 2.0 mph
)
High speed
0 - 5.4 km/h
(
0.0 - 3.4 mph
)
Gradeability
70 % (35°)
Attachment
Crowd force
19020 daN
(
42759 lbf
)
Break-out force (with
2.65 m
(
104.33 in
) arm)
15300 daN
(
34396 lbf
)
Break-out force (with
3.18 m
(
125.20 in
) arm)
13240 daN
(
29765 lbf
)
Break-out force (with
3.66 m
(
144.09 in
) arm)
11870 daN
(
26685 lbf
)
Undercarriage
One-piece frame with welded components
Lubricated track rollers and idler wheels
Grease cylinder track tension system
Steel tracks (standard)
600 mm
(
23.6 in
)
Steel tracks (optional)
700 mm
(
27.6 in
)
Steel tracks (optional)
800 mm
(
31.5 in
)
Ground pressure (with
600 mm
(
23.6 in
) track pads)
0.57 bar
(
8.3 psi
)
Ground pressure (with
800 mm
(
31.5 in
) track pads)
0.43 bar
(
6.2 psi
)
Safety devices
Control for lowering attachments in case of engine failure
Controls are disabled by lifting the function cancellation lever or the left-hand control arm
Engine emergency shut-down, anti-theft protection
Safety glass, dual horn
Inertia reel type safety belt
Rear view mirror (cab side and right side)
Rear view camera
Battery master switch (if equipped)
ROPS
: Roll Over Protective Structure
FOPS
: Falling Objects Protective Structure (level 2)
optional
OPG
: Operator’s Protective Guard (front cab)
optional
Safety valves
optional
Fire extinguisher
optional
Travel alarm
8-2
Содержание CX300C
