Case CX300C, Руководство оператора

Страница: 138 / 288

4 - OPERATING INSTRUCTIONS
7. When the icon disappears, turn the ignition key to the
“Start” position. Release the key as soon as the en-
gine starts to turn. If the engine stops, wait about a
minute and perform the operation again.
NOTICE: Do not operate the starter motor for more than
ten seconds at one time. Do not operate the starter motor
when the engine is running.
HISNJU-005BZ
4
8. Run the engine until the "Automatic heating" icon dis-
appears from the systems display panel.
HISNJU-006BZ
5
9. Push the function cancellation lever forward (safety
bar in outward position).
NOTE: Check the systems display and console frequently
while the engine is running. (Refer to page 4-10 ).
NOTICE: This machine is equipped with a new type of en-
gine incorporating a high-pressure fuel injection system
which reduces the emission to the environment and re-
spects the regulations applicable to level 4 engine emis-
sions. Starting this engine takes about 1 second before
stabilisation.
NOTICE: If the engine does not start at the first attempt,
operate the starter motor for 10 seconds then wait for 1
to 2 minutes before retrying. When cold, the engine is at
times difficult to start. But in all cases, do not operate the
starter motor for more than 10 seconds.
HISNJU-008
6
4-8