Case CX300C, Руководство оператора

Страница: 266 / 288

6 - MAINTENANCE
MAINTENANCE CHART
Maintenance Chart
Bleed
Replace
Grease
Check
Drain
Clean
Interval Page
no.
Maintenance Action No.
of
pts.
6-20
Engine oil level
1 X
6-23 Coolant level 1 X
6-27 Fuel tank 1 X
6-34
Hydraulic reservoir level
1 X
6-54 Radiators and oil coolers 2 X
Every 10 hours or
daily
6-56 Fan and alternator belt tension 1 X
6-10 Tool quick coupler (optional) (Note A) 4 X
6-34
Hydraulic system lines —
X
Every 50 hours
6-67
Air conditioning (Note B)
1 X
6-10 Bucket linkages (Note C) 2 X
6-23 Tightening of clamps and radiator hoses (Note D) — X
6-27
Fuel pre-filter filter element
1 X
6-34
Hydraulic reservoir sediment
1 X
6-43
Primary air filter element (Note E)
1 X X
6-47 Swing reduction gear level 1 X
6-49 Travel reduction gears level 2 X
6-50
Pad screw torque (Note F) —
X
6-53 Track rollers and idler wheels — X
6-56 Fan and alternator belt tension 1 X
6-60 Cab protection (ROPS and FOPS) (optional) (Note F) 1 X
6-73
Screw and nut tightening torque (Note F) —
X
6-76 Batteries state 2 X
Every 250 hours
6-76 Batteries electrolyte level 2 X
6-10 Turntable bearing 2 X
6-10 Turntable bearing teeth 1 X
6-20 Engine oil 1 X
6-20
Engine oil filter
1 X
6-27 Fuel filter element 1 X
Every 500 hours
6-54 Radiators and oil coolers 2 X
6-10 Attachment (except bucket linkages) (Note G) 15 X
6-23
Cooling system (Note H)
1 X
6-34 Hydraulic fluid condition (Note W) 1 X
6-34 Hydraulic reservoir breather 1 X
6-43 Primary air filter element (Note J) 1 X
6-43
Secondary air filter element (Note K)
1 X
6-47 Swing reduction gear (Note L) 1 X
6-49 Travel reduction gears (Note L) 2 X
6-57
Engine valve rocker clearances (Note M) —
X
6-80
Alternator (Note M)
1 X
Every 1000 hours
6-80 Starter motor (Note M) 1 X
6-84