Case CX300C, Руководство оператора

Страница: 238 / 288

6 - MAINTENANCE
Fan and alternator drive belt
Service specifications
Visual check: Every 10 hours or every day
Check belt tension: Every 250 hours
Checking the tension
NOTICE: If the engine runs with the belt slack, the belt
can slip in its housing and cause the engine to overheat
or the battery to receive insufficient charge.
1IUTUH-004
1
With engine shut down and the ignition key removed, use
your finger to exert a pressure of about
10 kg ( 22.0 lb ) at
the center of the belt.
The tension slack should be between about
6 mm ( 0.2 in )
and 8 mm ( 0.3 in ).
NOTE: Check if there are any signs of wear damage to
the pulleys or the belt. Check carefully to ensure that the
belt is correctly positioned in the pulley grooves. If the belt
is stretched, cracked or frayed, it must be replaced.
1IUTUH-003
2
Adjusting the tension
Remove the retaining screws (1) and (2) . Use the adjust-
ment screws (3) to move the alternator outwards until belt
tension is correct. Tighten the alternator mounting bolts
(1) and (2) .
5PJHCJ-003
3
6-56